產品資料

美國ASCO氣動閥,世格氣動閥產品**  

如果您對該產品感興趣的話,可以
產品名稱: 美國ASCO氣動閥,世格氣動閥產品**  
產品型號: E290A384
產品展商: ASCO
產品文檔: 無相關文檔

簡單介紹

美國ASCO氣動閥,世格氣動閥產品**   portion of the clean air/inert gas system could be exposed to prevent freezing. If lubricated air is used, the lubricants must be compatible with 美國ASCO氣動閥,世格氣動閥產品**


美國ASCO氣動閥,世格氣動閥產品**    的詳細介紹

美國ASCO氣動閥,世格氣動閥產(chan) 品**  
 For "Quick Exhaust" valves, pressure port
is 1/20", exhaust port is 1/4".
 IMPORTANT: A Minimum Operating Pressure Differential
There are two exhaust flows in the exhaust mode
(pilot and main). The pilot exhaust must be
connected to the main exhaust when the air or
inert gas cannot be exhausted to atmosphere.
Supply and exhaust piping must be full area, unrestricted.
ASCO flow controls and other similar components must
be installed in the cylinder lines only.

美國ASCO氣動閥,世格氣動閥產(chan) 品**  

Available in 4 different coil terminations
• H Class coil construction
• Designed solely for installation in intrinsically safe
or NIFW areas, with properly approved and sized
limiting barriers
These solenoid valves are intended for use on clean
dry air or inert gas, filtered to 40 micrometres or better.
The dew point of the media should be at least 10°C
(18° F) below the minimum temperature to which any
美國ASCO氣動閥,世格氣動閥產(chan) 品**